The turbo skimmer contains a chamber for placing of Rowaphos and carbon, which slides in and out of the skimmer and is part of the skimmers construction.
High contact time is achieved by spinning the aerated water as it leaves the pump head.
By placing it directly in the sump it is very efficient, with low energy use as it requires no extra pipe work or pumps to operate or to drive water through it.
The unit is fitted with the same high efficiency pinwheel system as the rest of the Deltec skimmer range.
Simply place in the sump for plug and play set up on this model of skimmer.
Technical Data
Available in US 110V specifications
TS1060 Skimmer : Article No. 89002
Twin pump model.
Stands directly into the sump.
Draws its own water from the sump via the internal needlewheel pump.
Sump water level - min - 120mm - max - 180mm (4.75 - 7 inches)
700 litres of air/hr total are produced at the venturi.
Dimensions:
L 320mm W 175mm H 605mm - 12.6 x 6.9 x 23.8 inches (normal position).
H 610mm - 24 inches (allowing for removal of the cup).
Stocking:
Normal Stocking 1500 lts - 333 UK gallons - 400 US gallons
Heavy Stocking 1000 lts - 222 UK gallons - 260 US gallons
